4 4 4 4 4 4 4 4

4 4 4 4 4 4 4 4

Duplex locomotive wheel arrangement


Front of locomotive at left

Baltimore and Ohio Duplex.jpg

The Baltimore & Ohio Railroad’s #5600
George H. Emerson.

Equivalent classifications
UIC class 2’BB2′
French class 2222
Turkish class 2424
Swiss class 4/8
Russian class 2-2-2-2
First known tender engine version
First use May 1937
Country United States
Locomotive B&O Class N-1
Railway Baltimore and Ohio Railroad
Designer Baltimore and Ohio Railroad
Builder Mount Clare Shops
Benefits Decreased wheelbase
Drawbacks Premature cylinder wear, cylinder clogging and restricted firebox size
First known “True type” version
First use April 1942
Country United States
Locomotive PRR class T1
Railway Pennsylvania Railroad
Designer Ralph P. Johnson
Raymond Loewy
Builder Baldwin Locomotive Works
Altoona Works
Evolved from 4-8-4
Benefits Better high speed performance
Drawbacks Wheel slip

steam locomotive, in the Whyte notation for describing locomotive wheel arrangements, has a four-wheel leading truck, two sets of four driving wheels, and a four-wheel trailing truck. While it would be possible to make an articulated locomotive of this arrangement, the only 4-4-4-4s ever built were duplex locomotives—with two sets of cylinders driving two sets of driven wheels in one rigid frame, essentially a 4-8-4 with divided drive.



Detail, showing the rearward cylinders and gear of the sole N-1.

The first locomotive built with this arrangement was the Baltimore and Ohio Railroad’s sole class N-1 #5600
George H. Emerson, constructed at the B&O’s own Mount Clare Shops in May 1937. To reduce the fixed wheelbase, this locomotive had the two sets of cylinders at opposite ends, so that the rear pair were beside the firebox. This proved to be a poor design, as it restricted the firebox size and exposed the cylinders to dust and dirt, causing premature wear. The locomotive was not considered successful enough to duplicate. The sole N-1 was retired in 1943 and scrapped in 1950.[1]

The next locomotives to use the 4-4-4-4 arrangement were the Pennsylvania Railroad’s 52 class T1 locomotives (although the single class S1 was originally intended to be a 4-4-4-4, it was later changed to 6-4-4-6 due to increased weight). These had the cylinders in front of the wheels they drove, so that the rear pair were between the two sets of drivers. These locomotives were impressive performers but suffered from wheelslip and severe reliability problems, and did not last long in service.
The two prototypes, #6110 and #6111, were constructed at the Baldwin Locomotive Works in April 1942. The mechanical design work had been undertaken by Baldwin’s chief engineer Ralph P. Johnson, while the streamlining was the handiwork of industrial designer Raymond Loewy.[2]
Both locomotives showed fantastic performance in test trials, leading to the construction of 50 further examples. Numbers 5500 through 5524 would be constructed at the PRR’s Altoona Works while 5525 through 5549 would be constructed at Baldwin. As operation continued, problems arose. The T1 class was known for violent uncontrollable wheel slip as well as performance and maintenance issues caused by the Franklin oscillating-cam Poppet valves.[4]
The PRR did show interest in trying to solve these problems such as replacing the original poppets on #5500 with easier to maintain Franklin rotary-cam poppet valves and refitting #5547 with Walschaerts valve gears reclassifying the latter engine as a “T1a”.[4]

In the end, the PRR decided to stop development of the T1 class, replacing all examples by the mid-1950s with diesel units. All members of the class were scrapped. It is very likely the T1 may have had many of its shortcomings solved had the PRR not retired the short-lived class so soon.[4]
During its short service life, the T1 was rumored to have operated at higher speeds than the steam speed record set by the London and North Eastern Railway’s
Mallard, but the claims could not be officially verified.[5]

Baca :   Kawat X Dan Y Memiliki Diameter Yang Sama

Several bush tramway engine types were built with this wheel arrangement. These were known as “16-Wheelers”. Two notable builders were J. Johnson and Sons Ltd, Invercargill, and A & G Price, Thames, New Zealand.

Currently, only one locomotive of the 4-4-4-4 arrangement is being constructed. When finished, PRR 5550 will be the 53rd and only surviving example of the PRR T1 class rather than a replica. Furthermore, the new build T1 is expected to implement some design improvements to help aid in solving problems encountered by the original 52. The estimated date of project completion is currently set around the year 2030.[6]
As of November 4th 2019, the project is 34.1% complete with an estimated total cost of US $7,000,000.[7]



  1. ^

    Reed, Brian (June 1972).
    Pennsylvania Duplexii. Loco Profile 24. Windsor, Berkshire: Profile Publications Limited. pp. 266–267.

  2. ^



    Staufer 1962, p. 217.

  3. ^

    Staufer 1962, p. 225.
  4. ^




    Staufer 1962, p. 218.

  5. ^

    “Railway Vehicle Information Sheet – 1975-7007 – Mallard”
    National Railway Museum Official Website
    (PDF File). York England: National Railway Museum. p. 3. Archived
    from the original on 31 October 2017. Retrieved
    9 May

  6. ^

    “FAQ Section – The T1 Trust”. The Pennsylvania Railroad T1 Steam Locomotive Trust. 2016. Retrieved
    23 April

  7. ^

    “5550 Tender Preservation Fund”.
    prrt1steamlocomotivetrust.org. Pottstown, Pennsylvania, USA: Pennsylvania Railroad T1 Steam Locomotive Trust (published August 2017). 2017-08-21. Retrieved

Further reading


  • Staufer, Alvin (1962).
    Pennsy Power. Staufer. pp. 216–225. LOC 62-20872.

4 4 4 4 4 4 4 4

Sumber: https://en.wikipedia.org/wiki/4-4-4-4

Check Also

Contoh Soal Perkalian Vektor

Contoh Soal Perkalian Vektor. Web log Koma – Setelah mempelajari beberapa operasi hitung pada vektor …